Conveyors of DPT Series

Highly efficient belt conveyors with the output up to 4 x 400 kW.*1

The conveyors are equipped with drums with ceramic coating or with rubbered drums.

The motors of the conveyors can be air-cooled or water-cooled. The gear-boxes are water-cooled, by request it is possible to deliver the air-cooled version, however only up to the output 250 kW (Type K2SH450). As standard, the conveyors are equipped with the electro-hydraulic stretching device, however it is possible to deliver the pneumatic device as well. By customer´s request we also deliver a belt holding bin specified for the respective conveyor.
These conveyors are above all determined for steady mucking both by the recommended line type and by the built-up dimensions.
After the mucking-off the introduction surface we recommend to use longer line elements and the belt holding bin for 100 m of the belt-covering.
As standard, the conveyors are equipped with a back-stop device.
The conveyors can be operated in slants up to +18° and –12° , however they must be equipped for the respective slant.
The transport speed of delivered conveyors is 2,5 - 4 m/s depending on the drums diameters.

The conveyors are equipped with sensors measuring the temperature of the driving drums, reverse drum and discharging head. On the customer´s request it is also possible to mount sensors monitoring the reverse station revolutions, drums load, temperature of the motors and gear-boxes, belts swing etc.

—
*1 In the case of insufficient output, the conveyors can be equipped with auxiliary drives or with partial belts – see the schemes above.

More info [PDF; 4,86 MB]