|
Medium efficient belt conveyors with the maximum output 3 x 90 kW.
The conveyors are above all adapted for routes with temporal mucking (within 1-2 years) namely for their simple mounting and dismounting and for the small built-up dimensions of the driving stations.
The driving stations drums are from the diameter 400mm (c) through 630mm (s) up to the diameter 800mm (v). They are either all-metal or they can be rubbered, or on the customer´s request their surface can be with ceramic coating ensuring better friction coefficient between the drum and and the belt covering, especially under heavy working conditions (with water).
The conveyor stretching is made according to its length either mechanically or through the use of the mechanical stretching device or it can be used stretching with counter-weight, electro-hydraulic stretching or air stretching.
The conveyors can be equipped with the belt holding bin. The conveyors can be operated in slants up to ±18°, however they are not standardly equipped with the back-stop device (this can be delivered on the customer´s request), but as standard they are equipped with electro-magnetic or electro-hydraulic brakes. One brake is delivered as standard. The conveyor transport speed is 1,6 – 3,15 m/s according to the concrete request and utilization. The gear-boxes are air-cooled and two-speed, the motors are also air-cooled.
The conveyors are equipped with sensors measuring the temperature of the driving station drums. On the customer´s request it is also possible to mount sensors monitoring the temperature of the the reverse and discharging drum, reverse station revolutions, drums load, temperature of the motors and gear-boxes, belts swing etc.
The conveyors can be operated through the use of push-buttons for run-up and stop, however we offer standardly the automation control systems for the belt conveyors, namely electrical or air systems (kindly see below).
|
